IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3.
IR Ping uses the built-in IrDA stack of these devices and allows to play around with various IrDA functions and commands:
Discover - This command starts a discovery on the IrDA medium. All devices within the range are displayed with hardware address, hint bits and device name. The first device discovered will be used for the connect/test commands.
Connect IrLap - With 'Connect IrLap' a IrLap connection is set up to the first device discovered during the discovery.
Discon Irlap - Disconnect a running IrLap connection
Connect TP - Tries to set up a TinyTP connection. Therefore requests the receivers TinyTP-Lsap from the IAS data base of the receiver and on receipt requests the TinyTP connection.
Connect LMP - Sets up a IrLMP session. Requests the receivers IrLMP-Lsap from its IAS data base and requests a IrLMP connection. Some devices (e.g. the windows95 ir stack) have a short timeout between setup of the IrLap connection and the TP/LMP connection has to be set up shortly after the IrLap connection is established. Otherwise the device sends a disconnect.
TestReq - With this function a IrDA test is requested.
SendReq - The transmission of a data packet is requested. IR Ping sends 16 bytes (0x00, 0x01, 0x02 ... 0x0f) to the connected machine.
RxSize - The command displays the maximum packet size, the connected machine will transmit.
TxSize - This command displays the maximum paket size that can be transmitted.
DeviceName - This command requests the DeviceName from the receiver IAS data base. The answer is displayed with the next IAS callback.
All feedback, error and status information is displayed in a scrollable 80 lines buffer display.
What to do with this program?
This program is intended as a base for real IrDA applications. Just use IR Ping to check if your printer, cellular phone, notebook or PDA really talks the IrDA protocol and start writing an application like:
* printer driver for IR printer
* interactive (action) games
* internet communication over cellular phones
* backup, restore or HotSync to IrDA notebooks
* or just code segments like a selector box showing all IrDA devices in range and let the user select one
* ...
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
MacroPlay for Palm OS MacroPlay for Palm OS - If you perform a task repeatedly in Palm, you can automate the task by using a macro. A macro is a series of pen taps or key-presses that you group together as a single command to accomplish a task automatically
TealInfoDB: HTML Reference TealInfoDB: HTML Reference is a handy reference to HTML Tags with definitions of terms and simple examples for usage
barchart4palm barchart4palm is a simple component for displaying bar charts on PalmOS-powered devices. barchart4palm is written in Java and transformed into a native PalmOS application using Jump2. barchart4palm is based upon the Pilot-JFC user interface library.
Target audience of barchart4palm are developers, who write applications for PalmOS using Java-related technologies
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
RegCode Developer Kit RegCode Developer Kit is a standardized system which works with online software distributors to provide both security and realtime fulfillment.
This development kit includes examples, source code, and documentation describing RegCode
FtrList FtrList - I once needed a small tool to check which features were installed and what their values were and came up with this small program.
The program consists of a list in which all installed features are shown.
The first column is the creatorID of the owner, the second the feature number and the third the value in hex
PocketC PocketC is all you need to create and run applications directly on your Palm OS-based device, no computer required. Create your source code in memo pad or a Doc editor, compile it with PocketC, and run your application directly from the PocketC application
TXT2CID TXT2CID is a tool for PP developers to convert any four character type or creator ID (example: appl,DAcc,STra, etc.) to it's UInt32 equivalent. Launch the application and type in the string, then press enter. It will display the conversion and copy it to the clipboard
iScript The iScript is an open-source implementation of WMLScript engine for PalmOS devices.
It is compiled as standard PalmOS system library and may be used not only in WML browsers, but in any application, which requires scripting capabilities.
Update Description:
version 1.1
Other Software by developer «Till Harbaum»:
No Streak Hack No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
The Grayscale Hack The Grayscale Hack - This is a utility for the Bodos PalmBoy and Phoinix Gameboy emulators. It may be useful for other applications as well.
This is a Hackmaster hack and requires the hackmaster application or a compatible replacement to be installed in order to work.
This hack allows the systems grayscale settings to be modified
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
IR Pong IR Pong - IR Pong is a two player action game for the Palm Pilot. You'll need a palm with infrared or bluetooth capabilities and a second person with a similar machine to play this game.
You can choose between nine different board layouts and adjust the level of difficulty as you get better
Mulg Mulg - Guide the marble through the maze and to the cross. Along the way you'll encounter stones blocking your passage, flipper bumpers, slippery ice, and several other obstacles. Be sure to visit Till's web site for hundreds of additional levels
