VoiceLauncher - Try before you buy! You can download VoiceLauncher and try it before buying. VoiceLauncher is complete and fully working without a registration key: you can create as many voice commands you want and test if VoiceLauncher is the application you need. Without a registration key VoiceLauncher will only execute the first pattern from your database at the very end of the process (step 3), but it will let you make enough experiments before you decide to buy it. Please take your time to read the tutorial, make your tests and ask if you need some help before buying.
VoiceLauncher is the very first voice recognition application publicly announced and made available for palmOne Treo600, palmOne Treo650 and palmOne Tungsten|T3. VoiceLauncher has been fully designed to take advantage of palmOne Treo600 and palmOne Treo650 specific features: 5-way navigator, phone application, signal and battery indicators just to give few examples.
VoiceLauncher is working on palmOne Treo600, palmOne Treo650 and palmOne Tungsten|T3. Other devices with PalmOS 5.2 or greater might work but have not been tested.
VoiceLauncher can launch applications, panels and phone calls with all above devices. It can dial through any helper compatible application, and is fully integrated with TAKEphONE phone application, allowing features likes pauses in phone numbering.
You have to select which application to assign to your voice pattern. It can be a panel, an application, or a phone number. To assign a phone number, you can either select Phone, VLauncher VoiceCall or TakePhone if you have it installed. VLauncher VoiceCall will request for phone helpers, Phone and TakePhone will use the chosen application to dial your number. To use pauses, you have to assign TakePhone as your application.
Editing a command is easy, select your command and modify it. You can record a new voice pattern, change the command name or application. Saving will replace the previous command in your database with the new one, you can also delete the command or cancel your changes.
Commands can be stored in the main memory or on a SD card. Please refer to memory card section of this document.
Default method to search for a command is a long press of the Screen PowerOn button, but you can set it to any another key.
Depending on your configuration, you will have to press the 5-way center button (or select the button) to confirm the recognized command is correct, you can talk to confirm this command, wait for it to be launched automatically, ...
What's New in This Release:
· Primary Treo 755p support
· Primary Centro support
Like it? Share with your friends!
Supported operating systems:
Palm OS 5.x
Other Software by developer «Jean-Francois MORREEUW»:
SIMNotify SIMNotify allows you to save the Treo600 or Treo650 Phone preferences, including the wallpaper, and attaches it to the IMSI number of you SIM card.
You can attach different wallpapers for different SIM cards, or when the GSM is turned off
Photos HQ Photos HQ is an application that lets you capture photographs of much higher quality than those created by the default camera software of your mobile phone.
Photos HQ enhances the capture capabilities of devices with an SVGA (640x480) camera and increases the resolution to 960x720 pixels by combining two consecutive images
BrightCam BrightCam sets the brightness of the Treo600 screen and the keyboard backlight depending on the light levels measured from the camera.
How to configure BrightCam?
The light levels measured by the camera may change depending on the camera type of your Treo600. BrightCam remembers the biggest and the lowest values received by the camera to adjust the brightness properly
WineManager WineManager is a new generation pocket cellar assistant. WineManager is the solution to help buying wines, track your cellar content, and select the proper wine from your cellar for your meal
Barcode/13 Barcode/13 is a full software barcode scanner for palmOne Treo600 and palmOne Treo650. Barcode/13 uses the Treo camera to scan ISBN, UPC-A and EAN-13 barcodes and exports the decoded value to the system clipboard. Barcode/13 can be launched within any application, and the returned value can be retrieve from the clipboard to make use of it into the initial application
LEDOff LEDOff - If you don't like the pulsing LED of your Treo600 or Treo650, LEDOff is for you: enable LEDOff, and it will disable the LED! Really, don't ask me why, I do LOVE my pulsing LED, but some users have requested such a stand-alone application. Well..
