DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
No lock No lock - if you don't know how to disable auto lock of the display of your Android smartphone then this application is for you! All you need to do is to press an option button on the screen and the lock will be disabled or enabled in the needed time without needless settings
Screen Tester Screen Tester - If you are interested in the health of the screen of your device, here is the application you were waiting.
You can check if your screen has flaws and if the touch screen works perfectly.
Finally you can clarify your doubts, so if you see strange defects in the image, you'll know if it's the screen or otherwise
Child Lock - Kids Mode Kid Launcher is a Home Screen Replacement that will only give access to the apps you choose. It is perfect for parents who have children too young to allow them complete access to your smarphone or tablet.Lock your kids out of apps they don't need access to
The Torch The Torch - The Torch turns your Android device into a simple flashlight using the phone's screen. Use it when you need to light up something. Simply touch the screen to get control buttons. Set flashlight brightness at first start, and the app remembers your settings
OI Flashlight OI Flashlight helps you find your way in the dark by keeping the display backlight turned on while this application is running.
· Wake lock while application is active.
· Pick a color for the light.
· Tap the screen or wait for 5 seconds to make it completely blank
Bna Lighter Put a realistic-looking lighter on your screen with this Android app. Move your device to the left to open the lighter, move it to the right to close it. You can also fling the lid with your finger to open it. Rub downward near the flint wheel to light it when it is open
LCD Density Changer LCD Density Changer - A little app to play with the LCD Density Settings. It lets you set the LCD Density Setting without editing the build.prop file (directly).
Be aware that the tweak only will work with launchers like LauncherPro. It doesn't work with Samsung's own TouchWizardLauncher
MySettings MySettings - Do you often change different frequently used system settings? Then, MySettings is for you.
MySettings is a beautiful tool that allows you quickly enable or disable different settings (ringer mode, brightness, gps, wi-fi, bluetooth, unlock pattern, autorotate, screen timeout, auto sync etc)
Flashlight + LED Flashlight + LED - The Flashlight application is a very easy to use and super fast application that converts your Android phone into a handy flashlight either using screen or camera led as a torch (camera led is not present in most devices)
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device WellcoM A68
