DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
The Torch The Torch - The Torch turns your Android device into a simple flashlight using the phone's screen. Use it when you need to light up something. Simply touch the screen to get control buttons. Set flashlight brightness at first start, and the app remembers your settings
FlashDroid FlashDroid is an open source Flashlight application.
This tool take advantage of your phone's bright screen to help you find your stuff in the dark.
This flash light application is a demonstration of how to make your Android application run in full screen
Trippy Ball Lockscreen Trippy Ball Lockscreen
So awesome
Customize your device!
Lock it now!
Screen ON Widget Screen ON Widget - An Android widget that keeps the screen on by preventing it from turning off. Click on the widget to activate and click again to deactivate. A notification is also posted while it runs. You can also click on the notification to deactivate
Disco Party Light Disco Party Light - Disco Party Lights app will change the screen of your Android Phone, Tablet's into a Disco Colorful / Blinking, Spark winkle Light app, that would be a Multiple colors with multiple shining sparkling stars, Blinking Dots, Glow Lines, and twinkle fireworks
LED Scroller LED Scroller - the scroller that actually LOOKS like a LED display! LED scroller lets you type in a text, choose color and speed, and scroll the text sideways like a LED display on your Android! As seen on billboards, stock tickers, banners and traffic signs everywhere
Flashlight + LED Flashlight + LED - The Flashlight application is a very easy to use and super fast application that converts your Android phone into a handy flashlight either using screen or camera led as a torch (camera led is not present in most devices)
Color Flashlight HD Color Flashlight HD - Turn your phone into a versatile flashlight with Color Flashlight
Turn your phone into a color flashlight.
Have you ever tried to use your phone's screen as a beacon of light, only to find it's just not bright enough? Turn your phone into a versatile flashlight with Color Flashlight, the app that brightens up your phone's day and leads the way
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device WellcoM A68
