AutoLight - HTC Topaz (Diamond 2) auto adjust backlight function is a good idea with a not very good implementation. It must be said to HTC excuse that the light sensor is very noisy, especially at low light conditions.
Some alternatives do exist but are not very good or are Compact Framework application (not a very good idea for background application).
AutoLight is supposed to be a better implementation for the auto adjust backlight function.
Requirements and compatibility
AutoLight was developed for HTC Topaz (Diamond 2) with WM6.1 and it critically depends on HTCSensorSDK.dll, HTCUtil.dll and on a 10 levels backlight starting from value 1.
It has been reported to work with WM6.5 and on Rhodium (Touch Pro 2) and it might work on some other HTC phones.
AutoLight is a native application with a very low memory usage. On the other hand the Configurator requires Compact Framework 2 but it should be closed after the use.
The Configurator is designed for WVGA screens.
· Fix for phones where sensor data was returned as int instead that byte
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
LevelSight LevelSight - This application was originally built to flatten the brightness levels between AC and BATT on the Kaiser, but since lacking a workable front-camera API access, this works out better on devices with a light sensor.
More information is available here.
· works with native OEM backlight without extra
Lumos Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2
TouchLockPro TouchLockPro is designed not to interfere with running applications and is a multipurpose locking application. Other locking solutions are often specific for locking only incoming calls/SMS. A lot of locking solutions also place a (transparent looking) Window on top of the running application (e.g
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
MortSaver MortSaver is a combination of screensaver, keylock, and a "stay off!" function. Screensaver:
The display's turned off, but the PPC keeps running (e.g. for audio players). In spite to other tools, MortSaver turns off the dispay again if it's been switched on by e.g. an alert or the on/off button
G-Light G-Light - Adjust your backlight levels according to the values your light sensor measures.
Because I wasn't satisfied with the automatic backlight adjustment of my Diamond (it was always too bright for my needs), I made G-Light.
With this tool you can adjust your backlight levels according to the values your light sensor measures..
PDAlight PDAlight - A tiny utility that converts your prized Pocket PC device into a cheap flashlight.
It fills the entire screen with one of 8 colours of your choice. Selected by using the up/down motions of the directional navigation pad. Default is White (like most flashlights), but it can be Grey, Blue, Red, etc. if the situation requires. Its small, simple, yet effective
Backstep Backstep - This is a simple utility that will toggle the backlight of a Compaq iPaq from Off-Low-High-Low-Off each time it is run. There is no user interface, it just does its job and exits. I have assigned it to the record button on my iPAQ, so that I can easily toggle the backlight off and on whenever I wish
ColorChange A program for painting the screen in a certain color
Prog Reso Swap Prog Reso Swap-this program enables you to easily switch individual applications on your Pocket PC Windows 2003 SE between low-resolution QVGA and high-resolution VGA. This is only useful for Windows Mobile 2003 "SE" (Second Edition), and users of VGA Pocket PCs like Toshiba e800
Other Software by developer «Mauro Venturini»:
URL2Opera URL2Opera - As strange it might be OperaL.exe does not accept a .url file as command line parameter. Therefore, it is not possible to simply associate .url files to Opera and open them with it.
URL2Opera is a small application that extracts the URL from the .url file and passes it to Opera. This way the association became possible.
Install
Run URL2Opera.cab
GPS Receiver Reset Utility GPS Receiver Reset Utility - Sometimes GPS receivers (at least my Hamlet HBTGPS20) stop working correctely (no or unstable fix). Hamlet advice is to reset it using a desktop Windows program that they provide. Unfortunately, this requires a BT enabled desktop or laptop PC. Very unpractical indeed!
This small utility can be used to reset GPS receivers
Sicve Tutor Assist Sicve Tutor Assist - The Italian Sicve Tutor system checks that the mean speed of vehicles between verification "portals" is below the speed limit (typically 130 km/h)
AutoAudioRoute AutoAudioRoute - At last VOIP works decently on many Windows Mobile 6.1 phones and it can be accessed using the standard dialer/phone application. The only problem is the sound trough the speakerphone instead of the earpiece
Schedule Reset Schedule Reset - Schedule Reset is a small utility that offers various enhancements for your Pocket PC:
- Soft reset of your device every day at a specified time.
- Optional warning sound and countdown before actual reset (just in case you are using the device).
- Optional execution of a script before the reset to delete garbage files, backup, etc
SetSIP SetSIP - Changing SIP (software keyboard) type is both cumbersome (that small finger unfriendly arrow near the SIP icon) and slow (the selection menu does not pop up for a noticeable time). Worse on Topaz (Diamond 2) the menu has 2 levels: one for selecting between Touch Input full QWERTY and Phone Keypad and one for selecting other SIP types
SWE SWE This application plays a .wav file during a phone call. It can play the sound on the earphone or the speakerphone.
Usage:
Copy the .exe on your phone and run it
Select a .wav file using the Sound... button.
Test the sound using the Test button and regulate the volume using the + and - button
