Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
G-Rotator G-Rotator is an application which uses the G-Sensor to detect the orientation of the device to change the screen orientation respectively. Sensitivity of sensor and duration after which data from sensor has to be fetched is user-defined
SpoonTorch SpoonTorch - Does your phone or PDA not have an external light on it? Do you want to use your phone's screen as a light?
This application lets you quickly create a white screen to use as a torch.
· Single tap of the screen to make the whole screen turn white. Tap again for the menu.
· Switching to fullscreen, backscreen brightness is set to maximum
VJCandela VJCandela - Turn you phone into a super bright torch!
This program is used to permit control of the flash light on the Universal family of HTC Phones, to allow it to be used as a torch etc.
Note: this may cause damage to your hardware over prolonged periods! I don't see why it should, but use at your own risk
HTC Touch Flashlight HTC Touch Flashlight - Easy Flashlight is a simple utility the turns your Windows Mobile Professional phone into a flashlight. Easy Flashlight has built in controls to change your backlight settings. With full screen several fun silhouettes you can make being caught in the dark fun
Extended Control Extended Control - Pocket PC Control Panel settings are notoriously difficult to access. Extended Control puts configurable icons on your today screen which provide direct access to frequently used settings.
In addition, there's a running display of used program memory, storage memory and battery strength percentages
ColorChange A program for painting the screen in a certain color
DiscoLight DiscoLight - DiscoLight displays disco-like lights on the screen of your Pocket PC.
DiscoLights requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Backstep Backstep - This is a simple utility that will toggle the backlight of a Compaq iPaq from Off-Low-High-Low-Off each time it is run. There is no user interface, it just does its job and exits. I have assigned it to the record button on my iPAQ, so that I can easily toggle the backlight off and on whenever I wish
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Windows Mobile 5.0
