TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight.
Usage
There is no GUI for this application. Just start TorchButton to enable the LED on the back of your device. Start TorchButton again to turn it off.
Check out the readme if you're an advanced user and wish to change some registry settings, i.e. to allow a longer maximum time the LED is enabled.
What's New in This Release:
· Fixed icons not showing in HTC Sense or WM 6.5 start menu when installed to Storage Card
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Fake FingerPrint LockScreen Fingerprints are among the most unique signatures known to mankind, and security is always a primary thought to the everyday tech user
TouchResponse TouchResponse - This program is a touch driver to handle the touchscreen presses and vibration. TouchResponse will vibrate on touch.
A settings program exists to configure how the vibration works. Since this is a touch driver, there is no program you need to run to start it
Torche Torche - When you have need to make a light open this program and with a simple click your camera FLASH is ON!!!! It's very important to have this program... In this installation install the program in folder Windows/Torche. In this folder you find another file "dllSAMSUNG", you must install also this file..
LiteToggle LiteToggle is a simple utility to toggle the backlight between low, medium and bright levels for certain HTC devices.
Usage Notes
1. Ensure that "Auto adjust backlight" is disabled in the backlight settings.
2. Run the software to toggle the backlight level. No user interface is provided.
3
SteelSoft FlashLight When you are in the dark, it can give you continuous light. It could be you to control brightness
LightDimmer LightDimmer - This program is an adjustable flashlight. You can use the joypad of your PocketPC to increase/decrease the darkness. Press the action button to turn the light on or off.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
KeepScreenReadable KeepScreenReadable is a program for optional keeping backlight and changing orientation when specified application was executed. It doesn't look for specified app in process list but creates special shortcut to itself instead then executes your app from itself. So you can create a shortcut to a reader (PocketDjvu, FoxitReader, Alreader2), GPS navigation app etc
Coaster Coaster - This program converts your PocketPC into a coaster. NOTE: Use a screen protector when using this program.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Auto Light Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
LeoCpuSpeed LeoCpuSpeed is an app to control the speed of the CPU