DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Android Flashlight PRO Android Flashlight PRO - Turn your Android phone into a flashlight using the device's camera LED. Simple, fast and elegant.
The app has been tested to work with: Samsung Galaxy Nexus, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy Note, Samsung Nexus S, LG Optimus 2X, Motorola Droid II, HTC Wildfire, HTC EVO 3D, HTC Desire
Lamp (Android) Lamp is designed for temporary lighting or is used as a flashlight. It includes there lamps that you can turn on or off by touching the screen. You can adjust the high, middle and low brightness level
Night Vision Night Vision - Activate Night Vision on your mobile phone! This app is a Night Vision Goggle simulator for your Android. It utilizes your rear facing camera with a green monochrome tint and full exposure settings to simulate a night vision goggle experience
Knock Door Lock Screen Knock Door Lock Screen - Its price free and also ad free (interstitial ad ) application.
Knock Door Screen Locker is an amazing and simple application for your phone screen locker.
Its keeps you secured from unauthorized from person by door.
By using this application you will get ride entering PIN or Draw specific pattern
Flashlight + LED Flashlight + LED - The Flashlight application is a very easy to use and super fast application that converts your Android phone into a handy flashlight either using screen or camera led as a torch (camera led is not present in most devices)
Screen On Screen On - This Android application will keep the screen on, when an application of those you have selected in the list is running. It periodically checks to find if the application is running and locks the screen not to sleep. When the application stops, the lock goes off.
Screen on when charge option
Gravity screen Gravity screen - apply embedded position indicator to set up on or off option of your display changing the position of your device in a certain way. Automate the process of the screen behavior without using buttons
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Xiaomi Black Shark Global Dual SIM TD-LTE 64GB SKR-H0
