nueLight - nueLight turns your device into a versatile flashlight. nueLight uses the flash LED for the camera and can even enter high-beam mode. nueLight also has a morse code function where it will send text you type as morse code over the flash LED.
To use the locking mode, let go of the app button (default: voice command) and quickly tap the lock button (default: comm manager).
Warning: Overriding the built in safety timer can burn out the flash LED. Use at your own risk.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
Morse Torch Morse Torch - convert your mobile into a pocket torch! This torch comes with a PTT key that allows you to use the torch for sending a message in morse code. The programm uses the mobile's flashlight LEDs.
Try the free demo version! This program is designed to work with HTC HD2, no other models have been tested for compatibility so far
Torche Torche - When you have need to make a light open this program and with a simple click your camera FLASH is ON!!!! It's very important to have this program... In this installation install the program in folder Windows/Torche. In this folder you find another file "dllSAMSUNG", you must install also this file..
Backstep Backstep - This is a simple utility that will toggle the backlight of a Compaq iPaq from Off-Low-High-Low-Off each time it is run. There is no user interface, it just does its job and exits. I have assigned it to the record button on my iPAQ, so that I can easily toggle the backlight off and on whenever I wish
A Flashlight Have always A flashlight with you! Its probably one of the most use full application you will install on your phone!
Lighter Lighter - Do you need a light? The following lights included in software: * Simple lamp * Power saving lamp * Disco lighting * SOS lighting * Stroboscope (5Hz) * Simple colors Touch anywhere on screen to switch on/off lamp
Backlight Control A small and simple application to control the backlight
screenGuard ScreenGuard, your intelligent device protector.Do you want to carry your Pocket PC in your pocket? It disables the touch-screen & buttons allowing you to still see the screen!
Lumos Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2
disCali disCali - disCali disables the "Align Screen" that pops up whenever you press the middle D-PAD button + Message Button.
Instructions:
1. Install the cab.
2. Run "disCali" form Start Menu > Programs, this will disable the align screen function from your entire device until soft-rest (even from the control panel).
3
Force High Resolution Force High Resolution - Many applications display poorly on Pocket PC VGA as they don't support VGA mode, but use "double pixelisation". There's a work-around for this problem without having to go to "Full VGA" (as SE_VGA and OzVGA do). But this requires adding a little file next to each specific executable
Other Software by developer «No2Chem»:
nueFont NueFont is a utility that lets you adjust system fonts
nueTVOut nueTVOut - nueTVOut allows you to force TV output to be on, and allows use of the TV Out control panel even if you do not have an original HTC Video out cable.
To use the TV Out, you will need the audio dongle (rectangular block) that came with the phone, as well as a camcorder/iPod video cable
nueTTY-Console nueTTY-Console - nueTTY-Console is an utility to communicate with HTC-branded Windows CE devices in bootloader mode. It uses the WinUSB library to communicate with the device. Currently only working in Windows Vista.
WARNING!!!
Some commands can damage or destroy ("brick") your device
nueAdvancedProcessor nueAdvancedProcessor - nueAdvancedProcssor lets you change some advanced processor settings such as program flow prediction, unaligned accesses, and the cache replacement strategy on ARMv6 or new processors
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
nueNullKB nueNullKB - nueNullKB is a new version of nullKB which does not require ATL and supports VGA devices (i.e. the icon is not stretched out anymore).
If you want to change the icon, use a resource hacker – the first icon is a 32x32 icon for VGA devices and the second icon is a 16x16 icon for QVGA devices
nueLED2 nueLED2 - nueLED2 is an open source LED control library. The control libraries are licensed under LGPL v3.0, while the sample applications are licensed under the MIT license. A .NET wrapper is also included.
For Users
nueLED2, unlike nueLED, does not provide a user interface for controlling LEDs (yet!)
nuePower/nueBattery nuePower/nueBattery - nuePower consists of nuePowerCPL, and a modified power driver (nueBattery) that allows you to view increasing battery power in 1% increments. The power driver is currently available for the Titan and Vogue (i.e. Sprint Mogul, Touch)
nueBattery is available for the CDMA Touch Pro and Diamond
nueUSBKeyboard nueUSBKeyboard - nueUSBKeyboard turns your mobile device into a real USB HID Keyboard, allowing you to use your device's keyboard (or soft keyboard) to enter text, control the BIOS, etc on your computer, or other USB Host that accepts HID Keyboards (i.e. Playstation3, XBOX360, etc.)
nueKBLight nueKBLight - nueKBLight automatically turns on the keyboard backlight of your HTC Touch Pro when you switch to landscape mode, so you don't need to guess the first button to press anymore when using your device at night.
Note: The exe file in the archive is intended to be run on your phone/device. Copy the exe to your phone/device and run it from there
