DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Screen Regenerator Screen Regenerator - The screen of your smartphone is damaged every day. The pixels of the screen do not suffer even wear what causes the appearance of dead pixel and premature death of it.
Screen Revival is designed to reset the pixels of the screen to its factory state using a succession of pure colors
Flash-Light Fills white the whole screen by touching the screen
Led Flashlight HD + Applications Led Flashlight HD + Applications - Led Flashlight HD + Applications is the best LED flashlight application available on the Android Market today:
- Supports the widest range of devices with camera LED (flash)
- It is the flashlight / torch brighter the market, because the camera LED emits very intense light in the darkness
IQ Light Use your phone as a flashlight. Helps you find your keys on the dark. Small and simple application that sets your mobile phone's display to white
MySettings MySettings - Do you often change different frequently used system settings? Then, MySettings is for you.
MySettings is a beautiful tool that allows you quickly enable or disable different settings (ringer mode, brightness, gps, wi-fi, bluetooth, unlock pattern, autorotate, screen timeout, auto sync etc)
Trippy Ball Lockscreen Trippy Ball Lockscreen
So awesome
Customize your device!
Lock it now!
Bna Bulb Bna Bulb - This is amazing new idea of lighting up the place using phone Shake.
Bulb Light is an exciting new app that turns your phone Shake into a simple lamp light to help find your way in a dark setting. It starts up quickly, giving you an extremely bright light!
It has feature to choose your own bulb from the list of bulbs.
If you have any problem and suggestion
Bna Lighter Put a realistic-looking lighter on your screen with this Android app. Move your device to the left to open the lighter, move it to the right to close it. You can also fling the lid with your finger to open it. Rub downward near the flint wheel to light it when it is open
AiFlashlight AiFlashlight - is a multifunctional lighting able to turn your Android device into a flashlight, lighter and even blinkers of emergency services. You can enter text and the application will transform it into Morse alphabet and will send a message by means of light signals
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Ziss Cube MID