PocketPC Resistors helps figure out the values of resistors. Select the desired band and choose the color/value. The new resistor value is calculated and displayed. There are four, five, and six band resistors available.
PocketPC Resistors includes an Ohm's Law Calculator to calculate Voltage, Current, Resistance, and Power in a circuit
Electronic Filter design Reference for Pocket PC 2002/ 2003 is the combination of the following 2 individual modules :
FIR Filter Design Reference
IIR Filter Design Reference
Design FIR filters with required specifications and visualize the frequency plot and time plot
Electrical Reference with Motors for Pocket PC 2002/ 2003 V 2.1 - This NEW UPGRADED version of Electrical Reference with Motors includes formulae on Motors apart from formulae on Batteries, Ammeter Shunt etc
Modbus Master - The Modbus Master program allows you to communicate with one or more Modbus devices connected to the serial port or ethernet network port of your Pocket PC. With a suitable RS232 to RS422/485 converter, you can configure the program to communicate with up to 10 devices at the same time if you are using a multidrop connection
Modbus Slave - The Modbus Slave program allows your Pocket PC to emulate up to 10 Modbus slave devices which can communicate with another Master device connected to the serial port or ethernet network port of your Pocket PC. The Master device can be a PLC, a SCADA system or any other device or piece of software which runs as a Modbus Master
Dog Leg Severity was developed for engineers in the field who want a good estimation of the True Vertical Depth and Dog Leg Severity inside of a well. The engineers can use the Well Survey points to enter the Measured Depth, Inclination and Azimuth to calculate the estimated True Vertical Depth and Dog Leg Severity based
Mobile Resistor is an efficient electronic computation tool for everyday use. It is simple to use and it is also a very thin application. Users can accomplish the following functions:
Value to color mode:
Simple and fast computation of the wanted color code by setting the standard value range, value, multiplicator, tolerance, temperature coefficient