1st Color Mirror is the first mirror application that is adapted to color devices.
After a short test, I found out that turning all of the screen to a dark shade of gray gives better result than just a black screen. So here it is.
Color mirror turns your handheld's screen to a mirror when you don't have a real mirror nearby
AutoBacklight is a small application that allows to adjust backlight intensity according to the current time. It helps to improve display readability and optimize power consumption. It means that your PDA will run longer without recharging
Backlight Combo is designed to be the ultimate solution for effective use of the backlight on the recent Palm models (Palm Vx and the m50x series).
Backlight Combo consists of two separate programs that work together: Backlight Panel (BLT-Panel.prc) and Backlight Hack (BLT-hack.prc)
Backlight On will turn on the backlight of your m505 every time you turn your Palm on.
Backlight On differs from the "official" Palm app in several ways:
-There is never any user interface. It just works, and doesn't need to be configured.
- It is much smaller (under 1Kb).
- It turns on the backlight everytime the m505 is turned on
BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
Banner - Write huge messages on a PalmOS screen.
Communicate at a distance with your low-tech friends! Send messages in noisy environments and through windows! Write rude words in huge letters!
Banner accepts a text message and scrolls it in huge letters across the PalmOS screen. While the message is scrolling, press the up or down hardware buttons to interrupt
BrightCam sets the brightness of the Treo600 screen and the keyboard backlight depending on the light levels measured from the camera.
How to configure BrightCam?
The light levels measured by the camera may change depending on the camera type of your Treo600. BrightCam remembers the biggest and the lowest values received by the camera to adjust the brightness properly
BrightnessDAs - with a stroke of your finger (depends on the DA launcher you're using and the options you choose to invoke my DAs) your could quickly choose between minimum brightness (great for reading at night), low (~20%, for battery-conscious users ;), medium (50%, should be enough for most situations) or maximum (100%. The range above 50% up to 100% is superfluous)
