BrightCam sets the brightness of the Treo600 screen and the keyboard backlight depending on the light levels measured from the camera.
How to configure BrightCam?
The light levels measured by the camera may change depending on the camera type of your Treo600. BrightCam remembers the biggest and the lowest values received by the camera to adjust the brightness properly. If you want a fast range analisys, press the button while facing the sky and another time with the camera hidden by your finger.
BrightCam will set the brightness depending the light levels with a default configuration. You might think that this default configuration is too dim, or too bright. If you want a brighter configuration, move the slider on the right just a few pixels. If you want a dimmer configuration, move the slider on the left just a few pixels. You can use the button to see the result of your configuration.
This button will read the current light level measure by the camera and will show it on top of the slider. It is only useful for testing purpose if you want to check the light level in different situations.
This button will set the brightness depending on the current light level measure by the camera. When you are adjusting the slider to fit your needs, you can move the slider step by step and try the result with the button.
BrightCam will adjust the brightness when you power on the Treo600. If the continuous option is set, the brightness will be adjusted when you switch from an application to another if the light conditions have changed. You might set this option or not, as you want...
You might want to adjust the brightness of the screen without exiting your current application. If the option is set, the backlight key will request BrightCam to adjust the brightness now. Pressing the key a longer time will enable or disable the Locked mode. When enabled, the brightness of the LCD will be set to the brightest level and will remain at this level until you disable the feature. A sound is also played to help you know if you are enabling or disabling the Locked mode. If you don't want BrightCam to control the keyboard backlight, pressing will adjust the LCD brightness and switch the mode as usual. If the next option is checked, then will only adjust the LCD brightness and the keyboard backlight depending on the lighting level.
The previous option has been extended to give you more possibilities. When the option is enabled, you can choose if you want BrightCam to enable or disable the LCD automatic dimming after 15 seconds feature of the Treo600, and if you want to keep the keyboard automatic off when a dim lighting condition is detected.
You may have configured your Treo600 with a tone volume when you receive a call. When your Treo600 is in your pocket, can you hear the phone ringing? When a dim lighting condition is detected and you receive a call, BrightCam will adjust the tone to the maximum value possible. You can set this feature for phone calls, incoming MMS or SMS.
By default, the previous option will work anytime. If you want the feature to be enabled for a configured part of the day, you can press the button to select a time range. The button will reflect your configuration.
What's New in This Release:
· Fixed an issue with the registration form
Like it? Share with your friends!
Supported operating systems:
Palm OS 5.x
Similar Software:
BrightTools BrightTools is an application that controls the brightness of the screen. To achieve this it has three different tools that controls the LCD brightness value: scheduled brightness change, popup dialog box and external power connection.
The Scheduled brightness tool changes the brightness of the screen according to a profile of hourly brightness values
1st Color Mirror 1st Color Mirror is the first mirror application that is adapted to color devices.
After a short test, I found out that turning all of the screen to a dark shade of gray gives better result than just a black screen. So here it is.
Color mirror turns your handheld's screen to a mirror when you don't have a real mirror nearby
PocketFull of Mirrors PocketFull of Mirrors - This app is simple but EXTREMELY useful!
Ever wondered if your smile was spoiled by that renagade piece of corn stuck between your two front teeth? This app is for you! Check out your teeth without looking vain! Comes with 4 different mirror styles:
standard
bathroom
dresser
makeup!
Fancy
and Diamond!
One for every occasion, mood and person
Banner Banner - Write huge messages on a PalmOS screen.
Communicate at a distance with your low-tech friends! Send messages in noisy environments and through windows! Write rude words in huge letters!
Banner accepts a text message and scrolls it in huge letters across the PalmOS screen. While the message is scrolling, press the up or down hardware buttons to interrupt
Eye Mail Eye-Mail is intended to capitalize on the bright, hi-contrast display of color Palmsto send scrolling billboard messages
Tk Torch Tk Torch - Do you find yourself using your smartphone or PDA as a torch? This little application utilizes the entire screen for maximum brightness and lets you choose how long to keep the backlight on, over-riding the built in limit of 3 minutes auto off
configTre configTre - A small utility to configure your Treo 600 or 650
myDimmer myDimmer is the ultimate backlight brightness controller for your Palm, save your battery power while using your device in the day, and save your eyes, while reading in the dark.
Free Registration Code: 3356758
Backlight Combo Backlight Combo is designed to be the ultimate solution for effective use of the backlight on the recent Palm models (Palm Vx and the m50x series).
Backlight Combo consists of two separate programs that work together: Backlight Panel (BLT-Panel.prc) and Backlight Hack (BLT-hack.prc)
Light Utilities Turn you phone into a Nightlight/Flashlight or Strobelight or Partylight.
Other Software by developer «Jean-Francois MORREEUW»:
WineManager WineManager is a new generation pocket cellar assistant. WineManager is the solution to help buying wines, track your cellar content, and select the proper wine from your cellar for your meal
Barcode/13 Barcode/13 is a full software barcode scanner for palmOne Treo600 and palmOne Treo650. Barcode/13 uses the Treo camera to scan ISBN, UPC-A and EAN-13 barcodes and exports the decoded value to the system clipboard. Barcode/13 can be launched within any application, and the returned value can be retrieve from the clipboard to make use of it into the initial application
LEDOff LEDOff - If you don't like the pulsing LED of your Treo600 or Treo650, LEDOff is for you: enable LEDOff, and it will disable the LED! Really, don't ask me why, I do LOVE my pulsing LED, but some users have requested such a stand-alone application. Well..
Photos HQ Photos HQ is an application that lets you capture photographs of much higher quality than those created by the default camera software of your mobile phone.
Photos HQ enhances the capture capabilities of devices with an SVGA (640x480) camera and increases the resolution to 960x720 pixels by combining two consecutive images
VoiceLauncher VoiceLauncher - Try before you buy! You can download VoiceLauncher and try it before buying. VoiceLauncher is complete and fully working without a registration key: you can create as many voice commands you want and test if VoiceLauncher is the application you need
SIMNotify SIMNotify allows you to save the Treo600 or Treo650 Phone preferences, including the wallpaper, and attaches it to the IMSI number of you SIM card.
You can attach different wallpapers for different SIM cards, or when the GSM is turned off