CustomFirmware Enabler 2.10 to 5.03 ChickHen by Xenogears and Becus25.
What is?
A program that activates the functions of the M33 custom firmware using ChickHen.
What do I need?
- A PSP Slim (Slim only works with, regardless of the plate you have)
- Firmware version 5.03.
- ChickHen R2 (at least, look out with the patched version!).
2.10 Changes:
- Fixed a problem when you change settings for the plugins.
- Fixed internal problems.
- Fixed a problem that caused a crasheo accessing plugins and have no plugin.
- Improved detection of release.
2.02 Changes:
- Fixed a bug in the installation of the Pops (The PRX MD5 is different on each console, so the test worked, but then not)
2.01 Changes:
- Fixed a bug not detect either a previous installation (caused that could not be installed above the new version)
2.00 Changes:
- System pops native activation.
- System configuration Custom Firmware.
- Verification MD5 of files that are installed in flash, if you have not installed either, re-install.
- Nice interface.
- Safety flasheos unnecessary.
- Protection from ChickHen load the Custom Firmware.
(It is necessary that this ChickHen in a folder called "ChickHEN inside Photo or Pictures.)
- Changed version of the system (now shows 5.03 M33)
Installation:
- Copy the folder to your psp CFWEnabler in X: / PSP / GAME /
To be well: X: / PSP / GAME / CFWEnabler / EBOOT.PBP
IMPORTANT: Do not change the folder name CFWEnabler!
How to use:
Starts ChickHen from the picture section. Then start the homebrew called "CFWLoader 2.00.
Follow the instructions that tells you the program.
FAQ:
- Can load isos? - Yes, yes, you can.
- Do you like my PSP Slim? - Yes, it does not matter.
- Does my PSP3000? - No, it does not work.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Are you going to get a version for PSP3000? - It is not known.
- Sure you do not know? - Yeah, sure.
- Really? - Yes
- Really good for?
- Can you break my console? - This version has several checks to verify that everything is installed, it is 99.99% safe
- When you turn off the console I have to repeat the procedure? - Yes, you have to repeat it, but after the first time, no longer flashea anything.
- And you can not prevent either procedure? - Could be avoided if we could do an IPL compatible.
- Is expected to be in the future rectify the current problems? - It is possible, but is not guaranteed anything.
- Does the M33 SDK? - Yes, it works.
- Are the plugins? - Yes, they work.
Common Errors:
- When you start the program automatically goes to the menu --
Was unable to assign the flash, make sure you have a PSP Slim (2000), and if you go, make sure your version is correct ChickHen.
- I do not run the isos --
Make sure that your configuration is correct.
- I created a folder called SVCPlayer Why? --
You have a plugin that creates nothing to do with CFWEnabler.
- Other errors is important to check the plugins that are loaded can cause problems.
Activate Pops:
To enable compatibility with Native Pops, it is necessary to remove some modules of the firmware 5.00 official.
- Required --
- A PSP that enables homebrew loading (or PSP 2000 with Hen CFWEnabler voucher)
- The 5.00 update from Sony. (http://rapidshare.com/files/154173870/500.PBP)
- PsarDumper with support for 5.00. (http://rapidshare.com/files/165390935/psardumper500_3000_too.zip)
1.-The PsarDumper copy of our report.
2.-copy the firmware 5.00 to the root of the PSP under the name "EBOOT.PBP"
3.-execute the PsarDumper.
4.-click on "X" and waited.
5.-When finished, enter usb from pc and have a root folder called F0.
6.-looking pops.prx files in the folder and popsman.prx kd (in F0)
7.-The Copy To Folder Pops within CFWEnabler (X: / PSP / GAME / CFWEnabler / Pops)
8.-Run the CFWEnabler.
9.-click on the option "Enable Support Pops."
10.-We followed the instructions.
11 .- Done, and you can delete the files from the Memory Stick Pops, both the EBOOT.PBP and the F0 folder as the files in the folder CFWEnabler / Pops.
Warning: Using the Firmware M33 can be accessed freely by the USB Flash0 care because you can cause a brick, you are advised not to change anything to the internal memory.
Acknowledgments:
- A Dark_AleX for the M33 modules.
- Especially him, who knows who he is, and that is part of the credit for helping him.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
DayPR Rev.5.1 Hello lilmnm From Team Red Phoenix (TPR) here with a bug fix for DayPR that caused you to not be able to exit out of the pop up Keyboard Sorry for the Bug that shouldnt have happened in the first place
Half Byte Loader revision 92 Half Byte Loader revision 92
Developer's note:
Just when you thought the weekend couldn't get any better, here's a new revision of HBL. It only fixes a few minor issues (mainly, a memory leak in some cases), but I wanted those fixes to be in before I announced my side project for HBL: wMenu
PSPInstaller *fixed* - srclists showing files from other repo's when another repo was loaded
Krap-psp Krap-psp
Homebrew coder kenma9123 has released a new version of his feature-packed homebrew application, Krap-psp. Check the readme file included in the download for more information.
Changelog:
[!]Change file structure (delete your old krap folder)
[+]Created lite version
[!]Set loader.ini which one to load on boot e
PSARDUMPER for 5.00 decryption PSARDUMPER for 5.00 decryption
from Dark_AleX:
This is psardumper to extract 5.00.
Modules of psp3000 cannot be extracted and decrypted yet, due to keys being in 3000 ipl (kernel keys) and mesg_led03g.prx (filenames table keys).
Due to that, you will see various "warnings", just ignore that
CFW_SE/OE Easy_Version_ Changer_V6 Of course, what good is having the latest in custom firmwares when you don't have equally good apps to max its performance? In light of the phenomena that rocked (and is apparently still rocking) our site (hint: 3
X-Flash X-Flash
Once again, homebrew developer Art, has released an updated version of his cream of the crop X-Flash homebrew firmware modification tool for your PSP. In case you're new at this, when this app is used with caution and enough knowledge, it could alter and create a custom firmware for your PSP
eLoader eLoader
A most exciting news for MAC users everywhere: the new eLoader now comes with a MAC installer. Credit and thanks go to Delight1, developer and QJ registered user. We should say, she really is keeping the MAC users in step with the homebrew development scene
PSP Upgrader/Downgrader Full Version PSP Upgrader/Downgrader Full Version
Coder Bob Joe has developed a PSP Upgrader/Downgrader that should make upgrading, downgrading, and installing a custom firmware much easier. Amazingly, has a very big coverage including some of the most popular firmware from 1.50 to 3.52
xmbctrl for 6.39 PRO-B7 xmbctrl for 6.39 PRO-B7
Homebrew coder djmati11 has ported the XMB Control of 6.39 TN-A to 6.39 PRO-B7.
Developer's note:
This is xmbctrl of 6.39 TN-A ported to 6.39 PRO-B7.
!!! IMPORTANT !!!
DO NOT USE IT ON OTHER VERSIONS THAN 6
Comments on Custom Firmware Enabler:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if Custom Firmware Enabler supports it
