This is a compiled version of PSGroove with Backup patch, an open-source reimplementation of the psjailbreak exploit for AT90USB and related microcontrollers courtesy of Mathieulh and his team.
But before you proceed folks, make sure you know excatlyA what you are doing as this is totally a do-it-yourself method. You'll also need to purchase a small board, either the Teensy++ USB Development Board or AT90USBKEY, to jailbreak your console although some reports now claim that the code can also be ported to the PSP and TI-84 Plus Calculator.
It should work on:
AT90USB162
AT90USB646
AT90USB647
AT90USB1286
AT90USB1287
ATMEGA32U4
... and maybe more.
This software is not intended to enable piracy, and such features have been disabled. This software is intended to allow the execution of unsigned third-party apps and games on the PS3.
Cloning
The repository uses the LUFA library as a submodule. To clone, use something like:
Teensy boards only have one LED, so it will turn off when the exploit succeeds rather than turn green. Older Teensy 1.0 boards also have the polarity inverted. In general, a LED should do something when the board is powered, and do something different when theexploit works.
Building
On Linux, use the AVR GCC toolchain (Debian/Ubuntu package: gcc-avr). On Windows, WinAVR should do the trick.
make clean
make
Programming
Now program psgroove.hex into your board and you're ready to go. For the AT90USBKEY and other chips with a DFU bootloader preinstalled, you can get the dfu-programmer tool, put your board in programming mode, and run
make dfu
For the Teensy boards, you probably have to use the Teensy Loader software.
Using
To use this exploit:
* Hard power cycle your PS3 (using the switch in back, or unplug it)
* Plug the dongle into your PS3.
* Press the PS3 power button, followed quickly by the eject button.
After a few seconds, the first LED on your dongle should light up. After about 5 seconds, the second LED will light up (or the LED will just go off, if you only have one). This means theexploit worked! You can see the new "Install Package Files" menu option in the game menu.
Notes
A programmed dongle won't enumerate properly on a PC, so don't worry about that.
This software is not intended to enable piracy, and such features have been disabled. This software is intended to allow the execution of unsigned third-party apps and games on the PS3.
For more info about the release and to download all the necessary files needed to jailbreak, please visit the PSGroove Git Repository below.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
SaiZn's Red/Silver XMB Theme SaiZn's Red/Silver XMB Theme
Thanks to Stan, we heard about the creative works of SaiZn for making XMB themes. This time, these themes are multicolored, which means you can choose the color you want to use for your own XMB.
Now, since there are multiple themes here, let's explain the basic idea
Patapon 2 demo exploit Homebrew coder's Wololo, m0skit0, ab5000, and n00b81's crafted savegame exploit to run Half Byte Loader on the PSP and PSP Go using the Patapon 2 demo
Unofficial REBUG Updater Unofficial REBUG Updater - Attention all REBUG users! Do you want a 4.55 spoof made just for you? Click right here!
bitsbubba of PSX-Scene is back to share a new all-in-one spoofer for REBUG users that still want the 4.55 treatment
pergame.prx pergame.prx
Homebrew coder AtomicDryad has released a new version of his nifty module, pergame, a simple plugin that allows you to load "other modules as if they were in /seplugins/game.txt. The difference here is that pergame.prx loads on a per-eboot basis
droidMAN: 0.60: Takes Some Interface Cues From Aldo Vargas droidMAN: 0.60: Takes Some Interface Cues From Aldo Vargas - Have you had enough of droidMAN yet? This update doesn't add many new features, but it does include some interface tweaks suggested by the great Aldo Vargas!
As you all know by now, droidMAN is an Android apk designed to allow for the simple loading of PS3 backups using the webMAN plugin and your smartdevice
FuSa 1.0 FuSa 1.0
There are obvious advantages to playing a game on a screen that's bigger than your Sony PSP's screen. Fortunately, homebrew developer OldPrisoneR's custom firmware plugin - FuSa 1.0 Beta build 011 - allows handheld owners to play Sony PSP games on their TV sets over composite cable.
OldPrisoneR recently released a minor update to the homebrew application
CaptainCPS-X's NFTS Mounter: Mount ISOs for PS3 from USB Drives CaptainCPS-X's NFTS Mounter: Mount ISOs for PS3 from USB Drives - With Cobra firmware 4.46 you can load ISO files of all kinds. This software helps you mount them from NTFS drives!
Are you looking to load a PSX, PS3 or movie ISO from your NTFS drive? The only way to do that is with the new Cobra 4.46 firmware
Open Idea Eboot Builder Homebrew coder dridri has released the initial version of OpenIdea Iso Loader, an alternative solution to Liquidzigong's Prometheus ISO Loader with a slightly different twist, it runs your ISOs directly from the XMB
Toggle USB Flash2/3 special system Toggle USB Flash2/3 special system
From the same PSP homebrew developer who brought us Custom Firmware 1.62 IE-D, comes Toggle USB Flash2/3 special system. The brains behind this, becus25, mentioned that "with this tool you can access via usb to the Flash2 or 3 drive of PSP"
Libwiigui Libwiigui
is a GPL licensed GUI library for the Wii, created to help structure the design of a complicated GUI interface, and to enable an author to create a sophisticated, feature-rich GUI
Comments on PSGroove:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if PSGroove supports it
