This is a compiled version of PSGroove with Backup patch, an open-source reimplementation of the psjailbreak exploit for AT90USB and related microcontrollers courtesy of Mathieulh and his team.
But before you proceed folks, make sure you know excatlyA what you are doing as this is totally a do-it-yourself method. You'll also need to purchase a small board, either the Teensy++ USB Development Board or AT90USBKEY, to jailbreak your console although some reports now claim that the code can also be ported to the PSP and TI-84 Plus Calculator.
It should work on:
AT90USB162
AT90USB646
AT90USB647
AT90USB1286
AT90USB1287
ATMEGA32U4
... and maybe more.
This software is not intended to enable piracy, and such features have been disabled. This software is intended to allow the execution of unsigned third-party apps and games on the PS3.
Cloning
The repository uses the LUFA library as a submodule. To clone, use something like:
Teensy boards only have one LED, so it will turn off when the exploit succeeds rather than turn green. Older Teensy 1.0 boards also have the polarity inverted. In general, a LED should do something when the board is powered, and do something different when theexploit works.
Building
On Linux, use the AVR GCC toolchain (Debian/Ubuntu package: gcc-avr). On Windows, WinAVR should do the trick.
make clean
make
Programming
Now program psgroove.hex into your board and you're ready to go. For the AT90USBKEY and other chips with a DFU bootloader preinstalled, you can get the dfu-programmer tool, put your board in programming mode, and run
make dfu
For the Teensy boards, you probably have to use the Teensy Loader software.
Using
To use this exploit:
* Hard power cycle your PS3 (using the switch in back, or unplug it)
* Plug the dongle into your PS3.
* Press the PS3 power button, followed quickly by the eject button.
After a few seconds, the first LED on your dongle should light up. After about 5 seconds, the second LED will light up (or the LED will just go off, if you only have one). This means theexploit worked! You can see the new "Install Package Files" menu option in the game menu.
Notes
A programmed dongle won't enumerate properly on a PC, so don't worry about that.
This software is not intended to enable piracy, and such features have been disabled. This software is intended to allow the execution of unsigned third-party apps and games on the PS3.
For more info about the release and to download all the necessary files needed to jailbreak, please visit the PSGroove Git Repository below.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
CFW 6.60 ME CFW 6.60 ME
Homebrew developer neur0n is back to release a new version of his custom firmware 6.60 Minimum Edition for PSP Phat and Slim. What's new in the latest update?
Changelog:
Update version.txt loading. Now you can load txt from ms0:/seplugins/version.txt.
Update NidResolver for FuSa_SD.prx
PSP Upgrader/Downgrader Full Version PSP Upgrader/Downgrader Full Version
Coder Bob Joe has developed a PSP Upgrader/Downgrader that should make upgrading, downgrading, and installing a custom firmware much easier. Amazingly, has a very big coverage including some of the most popular firmware from 1.50 to 3.52
PSP Pandora Deluxe PSP Pandora Deluxe
Changelog:
v2.3 (2008-10-11)
- Fixed problem with 1.50 Kernel Addon selection.
- Added the following Support Tools:
Hellcat's Recovery Flasher 1.32 (Pandora)
AutoStartPRX 5 (XMB)
CPU-Modulator 0.20 (XMB)
CW Cheat 0.2
4.05 to 4.01 M33 Visualizer 4.05 to 4.01 M33 Visualizer
Sony's recent release of firmware 4.05 may have left some of the owners in a bit of a pickle. On one hand, updating to it will enable to them to enjoy the new visualizer feature that's been added. On the other hand, it may take some time before the M33 Team can successfully create a custom firmware to match up to Sony's official build
Twilight Hack Twilight Hack
Team Twiizers has updated Twilight Hack to v0.1 alpha 2. For those unfamiliar with this application, it allows users to run ELF files on their Wii. This pretty much opens doors for homebrew on the said console.
This updated version now allows users to load ELF files from an SD card using an SD Gecko or similar device
Dark AleX's PSP Fat 1.50 kernel addon for 3.71 M33 Dark AleX's PSP Fat 1.50 kernel addon for 3.71 M33
Dark AleX has finally released what he was promising a few days back: the 1.50 kernel addon for 3.71 M33. It's here, and it's mighty, and we're reeling in shock.
Installation instructions are pretty easy and straight forward. They're found in the readme so you better take a look at that
Random gameboots Random gameboots
Homebrew developer becus25 over at the QJ.NET Forums is announcing the release of his Random gameboots (rGameboot) v0.3 plugin for our usage. This open-edition (OE) firmware plugin allows PSP users to load and redirect their stored gameboots, with version 0.3 speeding up these two processes up
Ebootr Ebootr
is an editor for the PSP Eboot files.
Changelog:
-Added an SFO editor.
-Fixed some really nasty file saving bugs.
-Made life so much easier for people.
-Finished implementing some odd functions in SFO files
DayPR Rev.5 Hello lilmnm From Team Red Phoenix (TPR) here with the new and updated DayPR with A LOT of updated and new features and will also have and Easy Installer
DarkSpeed Final DarkSpeed Final
DarkSpeed Final from PSP Developer The Z is a CFW (custom firrmware) launcher for your PSP.A DarkSpeed Final will work with any PSP that is running firmware 6.39 or 6.60.A Take a look at the installation instructions as well as some additional developer notes below.
Installation
Put the PSP Folder on your PSP Drive (e.g. F:/ )
Launch the 6
Comments on PSGroove:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if PSGroove supports it
