Homebrew coders' Davee and some1 have teamed up to release a new version of their "multi-firmware downgrader" project, which now allows PSP 3000 09g users to downgrade to firmware 6.20.
So what does this app exactly do? Well, according to Davee, the downgrader will allow "users who are incontent with their firmware to downgrade to 6.20 using the Sony Updater." As he explains on his blog:
"As an ongoing project, me and some1 have been enhancing this downgrader from birth on the 6.31/6.35 firmwares. This multi-firmware downgrader allows you to install a lower (or higher) firmware without any fuss. No complex flash0 sharing, just running the firmware update. However, there comes restriction with PSP models and compatible firmware. For example, a PSPgo cannot run 1.50 as there are no drivers for the system and the IPL format is incompatible. Much like this, the PSP 3000 09g is unable to install firmwares < 6.30 which removes it's ability to appreciate the flexibility of permanent custom firmware.
"This is no longer the case.
"It started off with rumours of 09g systems being "converted" to 04g systems with some sort of Sony equipment. I explored the firmware comparing 04g and 09g and there is little difference between the modules, so I looked into what makes a 04g and 09g different. I got various testers (named below) to give me information on their IDStorage and internal system data (baryon/tachyon). From this I can conclude that the only (effective) difference between a 04g and 09g is:
Idstorage Certificates
Baryon Version
"Nothing more."
Changelog:
Added support for 09g units to 6.20
Developer's note:
How do I use it?
Copy the "PSP" folder to your PSP. The downgrader is "signed" and can be launched from OFW XMB. You need to copy the 6.20 update to PSP/GAME/UPDATE/EBOOT.PBP and for PSPgo it must be the eflash it is placed on. After setup run the downgrader and follow the onscreen instructions.
What does it technically do?
6.20-6.35: It uses the utility/power exploit to gain kernel access and reboots into the updater with a special PRX running. This PRX uses the pspdecrypt functionality to decrypt the updater PRX when needed. This allows the updater to boot in the newer firmwares.
6.38/6.39: It uses my http_storage exploit to gain kernel access.A Basically, http_storage has a vulnerability in it, where I can write -1 to anywhere in memory.
6.60: Uses sceNetMPulldown to gain kernel access.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Similar Software:
R4DS firmware Who doesn't love the user-friendliness of R4 team's R4 Nintendo DS flash cart? The popular DS homebrew platform is now finally updated to resolve the 1834 problem in previous versions of the R4, adding further functionality to the intuitive drag-and-drop user interface of the R4
Custom Firmware 6.35 beta Custom Firmware 6.35 beta
neur0n's 6.35 Custom Firmware for PSP 2000 (non-TA088v3 models) has been updated.
Changelogs:
v17 fix2
Update NidResolver.
Now you can use Total_Noob's Dayviewer 7 , MacroFire.prx , ScreenShotPNG_Plugin.prx etc.
v17 fix
Fixed crash when boot with JigkickBattery
VSHInform VSHInform
SG57's done it again. He's just made an alpha release version of an app that'll let you do a couple of niftyy things with your PSP's frequency and USB connection
Bricks-OS Bricks-OS
from Maximus32:
Bricks-OS is an Operating System primarily for Game Consoles. It's main goals is to share resources between different game consoles.
This is achieved by using message passing for communication
CycloDS Evolution Firmware CycloDS Evolution Firmware You gotta love it how Team Cyclops strive to tweak their products to perfection. Not long after the previous firmware version for CycloDS Evolution cards went online, the team just released another update to their firmware. CycloDS Evolution v1.2 BETA fixes a few issues to make the actual v1.2 worry-free
PSP Firmware 1.52 File (EBOOT) North America PSP Firmware 1.52 File (EBOOT) North America
IF YOU UPGRADE TO THIS FIRMWARE VERSION YOU WILL NOT BE ABLE TO PLAY HOMEBREW. However, you can downgrade back down to 1.50 by using the MPH downgrader tool found in our Hacks&Exploits section.
This is the 1.52 firmware for PSP
prxutility++ prxutility++
BATalert changed its name and is now prxutility + +.
Reminder: This plug-in helps prevent the user rather than the battery is very low.
Starting from 30%, the power LED starts to flash slowly,
then from 20% less it will blink slowly
then from 10% the LED will blink rapidly
and from 5% the LED will blink rapidly
CFW 6.38 ME-2 CFW 6.38 ME-2
CFW 6.38 Minimum Edition for 01g, 02g model by neur0n. From the readme:
From 5.00M33 -> OK
From 5.50GEN -> OK(may need to edit version.txt)
From 5.50Prometheus -> OK(may need to edit version.txt)
From 6.20TN-D -> OK
From 6.20PRO-B4 -> OK
From 6
Custom Firmware 6.35 PRO-B Custom Firmware 6.35 PRO-B
Homebrew developer's Coldbird and Virtuous Flame (aka Liquidzigong or the other way around) has just released a new version of their PSP Custom Firmware 6.35 PRO, improving the recently added PSX EBOOT support feature, as well as fixing some issues from the previous update.
Here's what's new in PSP Custom Firmware 6
System Firmware Just like Sony promised, the 2.80 Firmware is out! Although not yet listed on all the regional PSP sites, a lot of news tips are coming in that the update is live through the Network Update function in the PSP
Comments on Chronoswitch Downgrader:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if Chronoswitch Downgrader supports it
